run 20260428T211719Z-92bd

Summary

Prompt

Make a long rectangular mounting rail 100mm long (X) × 20mm wide (Y) × 8mm thick (Z). Center it in X and Y, with the bottom face on the XY plane (z = 0 to z = 8). Drill three through-holes of diameter 6mm, axes parallel to Z, evenly spaced along the centerline (y = 0) at x = -40, x = 0, and x = 40. Output a single solid.

Checks

params: {
  "type": "valid_solid"
}

details: {
  "error": "parse: Invalid JSON vcad file: invalid value: expected key to be a number in quotes at line 4 column 5",
  "reason": "fatal evaluation error"
}

params: {
  "type": "bbox",
  "min": [
    -50,
    -10,
    0
  ],
  "max": [
    50,
    10,
    8
  ],
  "tolerance_mm": 0.1
}

details: {
  "reason": "no valid solid to measure"
}

params: {
  "type": "mass_props",
  "volume_mm3": 15321.42,
  "tolerance_pct": 0.5
}

details: {
  "reason": "no valid solid to measure"
}

params: {
  "type": "hole_count",
  "diameter_mm": 6,
  "expected": 3,
  "diameter_tolerance_mm": 0.05
}

details: {
  "actual": 0,
  "diameter_mm": 6,
  "diameter_tolerance_mm": 0.05,
  "expected": 3,
  "found": []
}

params: {
  "type": "hole_positions",
  "diameter_mm": 6,
  "positions": [
    [
      -40,
      0,
      0
    ],
    [
      0,
      0,
      0
    ],
    [
      40,
      0,
      0
    ]
  ],
  "tolerance_mm": 0.15
}

details: {
  "diameter_mm": 6,
  "per_expected": [
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        -40,
        0
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        0,
        0
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        40,
        0
      ]
    }
  ],
  "tolerance_mm": 0.15,
  "unmatched_extras": []
}

params: {
  "type": "step_roundtrip",
  "tolerance_pct": 0.5
}

details: {
  "reason": "no valid solid to round-trip"
}

Tool calls

{
  "model": "claude-haiku-4-5-20251001",
  "max_tokens": 8000,
  "system_chars": 1632,
  "user_chars": 384
}

What the model built

.vcad source

{
  "version": "0.1",
  "nodes": {
    "rail": {
      "id": 0,
      "name": "mounting_rail_base",
      "op": {
        "type": "Cube",
        "size": {"x": 100, "y": 20, "z": 8}
      }
    },
    "rail_centered": {
      "id": 1,
      "name": "rail_centered_xy",
      "op": {
        "type": "Translate",
        "child": 0,
        "offset": {"x": -50, "y": -10, "z": 0}
      }
    },
    "hole_1": {
      "id": 2,
      "name": "hole_at_x_minus_40",
      "op": {
        "type": "Cylinder",
        "radius": 3,
        "height": 8,
        "segments": 32
      }
    },
    "hole_1_positioned": {
      "id": 3,
      "name": "hole_1_at_position",
      "op": {
        "type": "Translate",
        "child": 2,
        "offset": {"x": -40, "y": 0, "z": 0}
      }
    },
    "hole_2": {
      "id": 4,
      "name": "hole_at_x_0",
      "op": {
        "type": "Cylinder",
        "radius": 3,
        "height": 8,
        "segments": 32
      }
    },
    "hole_2_positioned": {
      "id": 5,
      "name": "hole_2_at_position",
      "op": {
        "type": "Translate",
        "child": 4,
        "offset": {"x": 0, "y": 0, "z": 0}
      }
    },
    "hole_3": {
      "id": 6,
      "name": "hole_at_x_40",
      "op": {
        "type": "Cylinder",
        "radius": 3,
        "height": 8,
        "segments": 32
      }
    },
    "hole_3_positioned": {
      "id": 7,
      "name": "hole_3_at_position",
      "op": {
        "type": "Translate",
        "child": 6,
        "offset": {"x": 40, "y": 0, "z": 0}
      }
    },
    "holes_combined": {
      "id": 8,
      "name": "all_holes_union",
      "op": {
        "type": "Union",
        "left": 3,
        "right": 5
      }
    },
    "holes_all": {
      "id": 9,
      "name": "all_three_holes",
      "op": {
        "type": "Union",
        "left": 8,
        "right": 7
      }
    },
    "final": {
      "id": 10,
      "name": "mounting_rail_with_holes",
      "op": {
        "type": "Difference",
        "left": 1,
        "right": 9
      }
    }
  },
  "materials": {},
  "part_materials": {},
  "roots": [
    {
      "root": 10,
      "material": "default"
    }
  ]
}

generated 2026-06-19T01:47:55.639Z · static site, regenerate with npm run build -w @mecheval/leaderboard