run 20260428T212940Z-28cf

Summary

Prompt

Make a square plate 80mm × 80mm × 6mm (X × Y × Z). Center it in X and Y, with the bottom face on the XY plane (z = 0 to z = 6). Drill one central through-hole of diameter 12mm on the Z axis, and four corner through-holes of diameter 6mm with axes parallel to Z, centered 10mm in from each corner of the top face. Output a single solid.

Checks

params: {
  "type": "valid_solid"
}

details: {
  "error": "parse: Invalid JSON vcad file: invalid type: string \"1\", expected u64 at line 5 column 15",
  "reason": "fatal evaluation error"
}

params: {
  "type": "bbox",
  "min": [
    -40,
    -40,
    0
  ],
  "max": [
    40,
    40,
    6
  ],
  "tolerance_mm": 0.1
}

details: {
  "reason": "no valid solid to measure"
}

params: {
  "type": "mass_props",
  "volume_mm3": 37042.83,
  "tolerance_pct": 0.5
}

details: {
  "reason": "no valid solid to measure"
}

params: {
  "type": "hole_count",
  "diameter_mm": 12,
  "expected": 1,
  "diameter_tolerance_mm": 0.1
}

details: {
  "actual": 0,
  "diameter_mm": 12,
  "diameter_tolerance_mm": 0.1,
  "expected": 1,
  "found": []
}

params: {
  "type": "hole_count",
  "diameter_mm": 6,
  "expected": 4,
  "diameter_tolerance_mm": 0.05
}

details: {
  "actual": 0,
  "diameter_mm": 6,
  "diameter_tolerance_mm": 0.05,
  "expected": 4,
  "found": []
}

params: {
  "type": "hole_positions",
  "diameter_mm": 12,
  "positions": [
    [
      0,
      0,
      0
    ]
  ],
  "tolerance_mm": 0.15
}

details: {
  "diameter_mm": 12,
  "per_expected": [
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        0,
        0
      ]
    }
  ],
  "tolerance_mm": 0.15,
  "unmatched_extras": []
}

params: {
  "type": "hole_positions",
  "diameter_mm": 6,
  "positions": [
    [
      30,
      30,
      0
    ],
    [
      -30,
      30,
      0
    ],
    [
      -30,
      -30,
      0
    ],
    [
      30,
      -30,
      0
    ]
  ],
  "tolerance_mm": 0.15
}

details: {
  "diameter_mm": 6,
  "per_expected": [
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        30,
        30
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        -30,
        30
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        -30,
        -30
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        30,
        -30
      ]
    }
  ],
  "tolerance_mm": 0.15,
  "unmatched_extras": []
}

params: {
  "type": "step_roundtrip",
  "tolerance_pct": 1
}

details: {
  "reason": "no valid solid to round-trip"
}

Tool calls

{
  "model": "gpt-4o-mini",
  "max_tokens": 8000,
  "system_chars": 1632,
  "user_chars": 397
}

What the model built

.vcad source

{
  "version": "0.1",
  "nodes": {
    "1": {
      "id": "1",
      "name": "BasePlate",
      "op": {
        "type": "Cube",
        "size": {
          "x": 80,
          "y": 80,
          "z": 6
        }
      }
    },
    "2": {
      "id": "2",
      "name": "CentralHole",
      "op": {
        "type": "Cylinder",
        "radius": 6,
        "height": 6,
        "segments": 32
      }
    },
    "3": {
      "id": "3",
      "name": "CornerHole1",
      "op": {
        "type": "Cylinder",
        "radius": 3,
        "height": 6,
        "segments": 32
      }
    },
    "4": {
      "id": "4",
      "name": "CornerHole2",
      "op": {
        "type": "Cylinder",
        "radius": 3,
        "height": 6,
        "segments": 32
      }
    },
    "5": {
      "id": "5",
      "name": "CornerHole3",
      "op": {
        "type": "Cylinder",
        "radius": 3,
        "height": 6,
        "segments": 32
      }
    },
    "6": {
      "id": "6",
      "name": "CornerHole4",
      "op": {
        "type": "Cylinder",
        "radius": 3,
        "height": 6,
        "segments": 32
      }
    },
    "7": {
      "id": "7",
      "name": "BaseWithCentralHole",
      "op": {
        "type": "Difference",
        "left": "1",
        "right": "2"
      }
    },
    "8": {
      "id": "8",
      "name": "FinalPlate",
      "op": {
        "type": "Difference",
        "left": "7",
        "right": "3"
      }
    },
    "9": {
      "id": "9",
      "name": "CornerHole2Positioned",
      "op": {
        "type": "Translate",
        "child": "4",
        "offset": {
          "x": 35,
          "y": 35,
          "z": 0
        }
      }
    },
    "10": {
      "id": "10",
      "name": "CornerHole3Positioned",
      "op": {
        "type": "Translate",
        "child": "5",
        "offset": {
          "x": -35,
          "y": 35,
          "z": 0
        }
      }
    },
    "11": {
      "id": "11",
      "name": "CornerHole4Positioned",
      "op": {
        "type": "Translate",
        "child": "6",
        "offset": {
          "x": -35,
          "y": -35,
          "z": 0
        }
      }
    },
    "12": {
      "id": "12",
      "name": "FinalPlateWithAllHoles",
      "op": {
        "type": "Difference",
        "left": "8",
        "right": "9"
      }
    },
    "13": {
      "id": "13",
      "name": "FinalPlateWithCornerHole3",
      "op": {
        "type": "Difference",
        "left": "12",
        "right": "10"
      }
    },
    "14": {
      "id": "14",
      "name": "FinalPlateWithCornerHole4",
      "op": {
        "type": "Difference",
        "left": "13",
        "right": "11"
      }
    }
  },
  "materials": {},
  "part_materials": {},
  "roots": [{
    "root": "14",
    "material": "default"
  }]
}

generated 2026-06-19T01:47:55.693Z · static site, regenerate with npm run build -w @mecheval/leaderboard