run 20260428T232704Z-87ae

Summary

Prompt

Make a flat square plate 60mm × 60mm × 8mm thick. Center it in X and Y with the bottom face on the XY plane (z = 0 to z = 8). Drill seven through-holes of diameter 5mm, axes parallel to Z, arranged in a hexagonal grid pattern: one hole at the center (0, 0), and six surrounding holes at the vertices of a regular hexagon with circumradius 15mm (distance from center to each surrounding hole is exactly 15mm). The first surrounding hole is on the +X axis, and the remaining five are evenly spaced every 60 degrees. Output a single solid.

Checks

params: {
  "type": "valid_solid"
}

details: {
  "error": "parse: Invalid JSON vcad file: invalid value: expected key to be a number in quotes at line 4 column 5",
  "reason": "fatal evaluation error"
}

params: {
  "type": "bbox",
  "min": [
    -30,
    -30,
    0
  ],
  "max": [
    30,
    30,
    8
  ],
  "tolerance_mm": 0.1
}

details: {
  "reason": "no valid solid to measure"
}

params: {
  "type": "mass_props",
  "volume_mm3": 27700.44,
  "tolerance_pct": 0.5
}

details: {
  "reason": "no valid solid to measure"
}

params: {
  "type": "hole_count",
  "diameter_mm": 5,
  "expected": 7,
  "diameter_tolerance_mm": 0.05
}

details: {
  "actual": 0,
  "diameter_mm": 5,
  "diameter_tolerance_mm": 0.05,
  "expected": 7,
  "found": []
}

params: {
  "type": "hole_positions",
  "diameter_mm": 5,
  "positions": [
    [
      0,
      0,
      0
    ],
    [
      15,
      0,
      0
    ],
    [
      7.5,
      12.99,
      0
    ],
    [
      -7.5,
      12.99,
      0
    ],
    [
      -15,
      0,
      0
    ],
    [
      -7.5,
      -12.99,
      0
    ],
    [
      7.5,
      -12.99,
      0
    ]
  ],
  "tolerance_mm": 0.2
}

details: {
  "diameter_mm": 5,
  "per_expected": [
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        0,
        0
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        15,
        0
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        7.5,
        12.99
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        -7.5,
        12.99
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        -15,
        0
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        -7.5,
        -12.99
      ]
    },
    {
      "pass": false,
      "reason": "no candidate cylindrical feature of this diameter remained unmatched",
      "spec_xy": [
        7.5,
        -12.99
      ]
    }
  ],
  "tolerance_mm": 0.2,
  "unmatched_extras": []
}

params: {
  "type": "step_roundtrip",
  "tolerance_pct": 0.5
}

details: {
  "reason": "no valid solid to round-trip"
}

Tool calls

{
  "model": "claude-haiku-4-5-20251001",
  "max_tokens": 8000,
  "system_chars": 1674,
  "user_chars": 601
}

What the model built

.vcad source

{
  "version": "0.1",
  "nodes": {
    "plate": {
      "id": "plate",
      "name": "Main Plate",
      "op": {
        "type": "Cube",
        "size": {"x": 60, "y": 60, "z": 8}
      }
    },
    "plate_centered": {
      "id": "plate_centered",
      "name": "Plate Centered",
      "op": {
        "type": "Translate",
        "child": "plate",
        "offset": {"x": -30, "y": -30, "z": 0}
      }
    },
    "hole_center": {
      "id": "hole_center",
      "name": "Center Hole",
      "op": {
        "type": "Cylinder",
        "radius": 2.5,
        "height": 8,
        "segments": 32
      }
    },
    "hole_center_positioned": {
      "id": "hole_center_positioned",
      "name": "Center Hole Positioned",
      "op": {
        "type": "Translate",
        "child": "hole_center",
        "offset": {"x": 0, "y": 0, "z": 0}
      }
    },
    "hole_1": {
      "id": "hole_1",
      "name": "Hole 1 (0°)",
      "op": {
        "type": "Cylinder",
        "radius": 2.5,
        "height": 8,
        "segments": 32
      }
    },
    "hole_1_positioned": {
      "id": "hole_1_positioned",
      "name": "Hole 1 Positioned",
      "op": {
        "type": "Translate",
        "child": "hole_1",
        "offset": {"x": 15, "y": 0, "z": 0}
      }
    },
    "hole_2": {
      "id": "hole_2",
      "name": "Hole 2 (60°)",
      "op": {
        "type": "Cylinder",
        "radius": 2.5,
        "height": 8,
        "segments": 32
      }
    },
    "hole_2_positioned": {
      "id": "hole_2_positioned",
      "name": "Hole 2 Positioned",
      "op": {
        "type": "Translate",
        "child": "hole_2",
        "offset": {"x": 7.5, "y": 12.99038105676658, "z": 0}
      }
    },
    "hole_3": {
      "id": "hole_3",
      "name": "Hole 3 (120°)",
      "op": {
        "type": "Cylinder",
        "radius": 2.5,
        "height": 8,
        "segments": 32
      }
    },
    "hole_3_positioned": {
      "id": "hole_3_positioned",
      "name": "Hole 3 Positioned",
      "op": {
        "type": "Translate",
        "child": "hole_3",
        "offset": {"x": -7.5, "y": 12.99038105676658, "z": 0}
      }
    },
    "hole_4": {
      "id": "hole_4",
      "name": "Hole 4 (180°)",
      "op": {
        "type": "Cylinder",
        "radius": 2.5,
        "height": 8,
        "segments": 32
      }
    },
    "hole_4_positioned": {
      "id": "hole_4_positioned",
      "name": "Hole 4 Positioned",
      "op": {
        "type": "Translate",
        "child": "hole_4",
        "offset": {"x": -15, "y": 0, "z": 0}
      }
    },
    "hole_5": {
      "id": "hole_5",
      "name": "Hole 5 (240°)",
      "op": {
        "type": "Cylinder",
        "radius": 2.5,
        "height": 8,
        "segments": 32
      }
    },
    "hole_5_positioned": {
      "id": "hole_5_positioned",
      "name": "Hole 5 Positioned",
      "op": {
        "type": "Translate",
        "child": "hole_5",
        "offset": {"x": -7.5, "y": -12.99038105676658, "z": 0}
      }
    },
    "hole_6": {
      "id": "hole_6",
      "name": "Hole 6 (300°)",
      "op": {
        "type": "Cylinder",
        "radius": 2.5,
        "height": 8,
        "segments": 32
      }
    },
    "hole_6_positioned": {
      "id": "hole_6_positioned",
      "name": "Hole 6 Positioned",
      "op": {
        "type": "Translate",
        "child": "hole_6",
        "offset": {"x": 7.5, "y": -12.99038105676658, "z": 0}
      }
    },
    "all_holes_union": {
      "id": "all_holes_union",
      "name": "All Holes Combined",
      "op": {
        "type": "Union",
        "left": "hole_center_positioned",
        "right": "hole_1_positioned"
      }
    },
    "all_holes_union_2": {
      "id": "all_holes_union_2",
      "name": "All Holes Combined 2",
      "op": {
        "type": "Union",
        "left": "all_holes_union",
        "right": "hole_2_positioned"
      }
    },
    "all_holes_union_3": {
      "id": "all_holes_union_3",
      "name": "All Holes Combined 3",
      "op": {
        "type": "Union",
        "left": "all_holes_union_2",
        "right": "hole_3_positioned"
      }
    },
    "all_holes_union_4": {
      "id": "all_holes_union_4",
      "name": "All Holes Combined 4",
      "op": {
        "type": "Union",
        "left": "all_holes_union_3",
        "right": "hole_4_positioned"
      }
    },
    "all_holes_union_5": {
      "id": "all_holes_union_5",
      "name": "All Holes Combined 5",
      "op": {
        "type": "Union",
        "left": "all_holes_union_4",
        "right": "hole_5_positioned"
      }
    },
    "all_holes_union_6": {
      "id": "all_holes_union_6",
      "name": "All Holes Combined 6",
      "op": {
        "type": "Union",
        "left": "all_holes_union_5",
        "right": "hole_6_positioned"
      }
    },
    "final": {
      "id": "final",
      "name": "Final Plate with Holes",
      "op": {
        "type": "Difference",
        "left": "plate_centered",
        "right": "all_holes_union_6"
      }
    }
  },
  "materials": {},
  "part_materials": {},
  "roots": [
    {
      "root": "final",
      "material": "default"
    }
  ]
}

generated 2026-06-19T01:47:55.835Z · static site, regenerate with npm run build -w @mecheval/leaderboard