run 20260429T120449Z-2893

Summary

Prompt

Make a stepped pyramid composed of three concentric square layers stacked along Z, fused into a single solid. Base layer: 80mm × 80mm × 10mm, centered in X and Y, bottom face on the XY plane (z = 0 to z = 10). Middle layer: 60mm × 60mm × 10mm, centered, sitting on top of the base layer (z = 10 to z = 20). Top layer: 40mm × 40mm × 10mm, centered, sitting on top of the middle layer (z = 20 to z = 30). The base layer has four bolt holes of diameter 6mm, axes parallel to Z, drilled through the full 10mm thickness of the base only (z = 0 to z = 10), located at (30, 30), (-30, 30), (-30, -30), (30, -30). Output a single solid.

Checks

params: {
  "type": "valid_solid"
}

details: {
  "root_count": 1,
  "solids_produced": 1
}

params: {
  "type": "bbox",
  "min": [
    -40,
    -40,
    0
  ],
  "max": [
    40,
    40,
    30
  ],
  "tolerance_mm": 0.1
}

details: {
  "actual_max": [
    40,
    40,
    30
  ],
  "actual_min": [
    -40,
    -40,
    0
  ],
  "deviation_max": [
    0,
    0,
    0
  ],
  "deviation_min": [
    0,
    0,
    0
  ],
  "max_abs_deviation_mm": 0,
  "tolerance_mm": 0.1
}

params: {
  "type": "mass_props",
  "volume_mm3": 114869.03,
  "tolerance_pct": 0.5
}

details: {
  "volume": {
    "actual_mm3": 115063.56671987216,
    "deviation_pct": 0.16935523863322005,
    "pass": true,
    "spec_mm3": 114869.03,
    "tolerance_pct": 0.5
  }
}

params: {
  "type": "hole_count",
  "diameter_mm": 6,
  "expected": 4,
  "diameter_tolerance_mm": 0.05
}

details: {
  "actual": 4,
  "diameter_mm": 6,
  "diameter_tolerance_mm": 0.05,
  "expected": 4,
  "found": [
    [
      30,
      30,
      6
    ],
    [
      -30,
      30,
      6
    ],
    [
      -30,
      -30,
      6
    ],
    [
      30,
      -30,
      6
    ]
  ]
}

params: {
  "type": "hole_positions",
  "diameter_mm": 6,
  "positions": [
    [
      30,
      30,
      0
    ],
    [
      -30,
      30,
      0
    ],
    [
      -30,
      -30,
      0
    ],
    [
      30,
      -30,
      0
    ]
  ],
  "tolerance_mm": 0.15
}

details: {
  "diameter_mm": 6,
  "per_expected": [
    {
      "distance_mm": 0,
      "matched_hole": [
        30,
        30
      ],
      "pass": true,
      "spec_xy": [
        30,
        30
      ]
    },
    {
      "distance_mm": 0,
      "matched_hole": [
        -30,
        30
      ],
      "pass": true,
      "spec_xy": [
        -30,
        30
      ]
    },
    {
      "distance_mm": 0,
      "matched_hole": [
        -30,
        -30
      ],
      "pass": true,
      "spec_xy": [
        -30,
        -30
      ]
    },
    {
      "distance_mm": 0,
      "matched_hole": [
        30,
        -30
      ],
      "pass": true,
      "spec_xy": [
        30,
        -30
      ]
    }
  ],
  "tolerance_mm": 0.15,
  "unmatched_extras": []
}

params: {
  "type": "step_roundtrip",
  "tolerance_pct": 0.5
}

details: {
  "per_solid": [
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          40,
          40,
          30
        ],
        "original_min": [
          -40,
          -40,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          40,
          40,
          30
        ],
        "roundtripped_min": [
          -40,
          -40,
          0
        ],
        "tolerance_mm": 0.5852349955359814
      },
      "index": 0,
      "pass": true,
      "volume": {
        "deviation_pct": 0.1627680038305869,
        "original_mm3": 115063.56671987216,
        "pass": true,
        "roundtripped_mm3": 114876.28004918595
      }
    }
  ],
  "tolerance_pct": 0.5
}

Tool calls

{
  "model": "claude-sonnet-4-6",
  "max_tokens": 8000,
  "system_chars": 1674,
  "user_chars": 703
}

What the model built

isometric render via vcad-render · the model's actual .vcad output, faceted at 28 segments per cylinder · download 20260429T120449Z-2893.vcad

.vcad source

{
  "version": "0.1",
  "nodes": {
    "1": {"id": 1, "name": "base_box_raw", "op": {"type": "Cube", "size": {"x": 80, "y": 80, "z": 10}}},
    "2": {"id": 2, "name": "base_box", "op": {"type": "Translate", "child": 1, "offset": {"x": -40, "y": -40, "z": 0}}},
    "3": {"id": 3, "name": "middle_box_raw", "op": {"type": "Cube", "size": {"x": 60, "y": 60, "z": 10}}},
    "4": {"id": 4, "name": "middle_box", "op": {"type": "Translate", "child": 3, "offset": {"x": -30, "y": -30, "z": 10}}},
    "5": {"id": 5, "name": "top_box_raw", "op": {"type": "Cube", "size": {"x": 40, "y": 40, "z": 10}}},
    "6": {"id": 6, "name": "top_box", "op": {"type": "Translate", "child": 5, "offset": {"x": -20, "y": -20, "z": 20}}},
    "7": {"id": 7, "name": "union_base_middle", "op": {"type": "Union", "left": 2, "right": 4}},
    "8": {"id": 8, "name": "pyramid", "op": {"type": "Union", "left": 7, "right": 6}},
    "9": {"id": 9, "name": "hole1_raw", "op": {"type": "Cylinder", "radius": 3, "height": 10, "segments": 32}},
    "10": {"id": 10, "name": "hole1", "op": {"type": "Translate", "child": 9, "offset": {"x": 30, "y": 30, "z": 0}}},
    "11": {"id": 11, "name": "hole2_raw", "op": {"type": "Cylinder", "radius": 3, "height": 10, "segments": 32}},
    "12": {"id": 12, "name": "hole2", "op": {"type": "Translate", "child": 11, "offset": {"x": -30, "y": 30, "z": 0}}},
    "13": {"id": 13, "name": "hole3_raw", "op": {"type": "Cylinder", "radius": 3, "height": 10, "segments": 32}},
    "14": {"id": 14, "name": "hole3", "op": {"type": "Translate", "child": 13, "offset": {"x": -30, "y": -30, "z": 0}}},
    "15": {"id": 15, "name": "hole4_raw", "op": {"type": "Cylinder", "radius": 3, "height": 10, "segments": 32}},
    "16": {"id": 16, "name": "hole4", "op": {"type": "Translate", "child": 15, "offset": {"x": 30, "y": -30, "z": 0}}},
    "17": {"id": 17, "name": "holes_12", "op": {"type": "Union", "left": 10, "right": 12}},
    "18": {"id": 18, "name": "holes_34", "op": {"type": "Union", "left": 14, "right": 16}},
    "19": {"id": 19, "name": "all_holes", "op": {"type": "Union", "left": 17, "right": 18}},
    "20": {"id": 20, "name": "stepped_pyramid_with_holes", "op": {"type": "Difference", "left": 8, "right": 19}}
  },
  "materials": {},
  "part_materials": {},
  "roots": [{"root": 20, "material": "default"}]
}

generated 2026-06-19T01:47:56.163Z · static site, regenerate with npm run build -w @mecheval/leaderboard