run 20260611T182700Z-a9ab

Summary

Prompt

Make a single solid consisting of a cube with a hemispherical dome fused onto its top face. Cube: 40mm × 40mm × 40mm, centered in X and Y with the bottom face on the XY plane (so it spans x in [-20, 20], y in [-20, 20], z in [0, 40]). Dome: a hemisphere of radius 15mm sitting on top of the cube, centered on the Z axis. The flat (circular) face of the hemisphere is flush with the top face of the cube at z = 40, and the dome extends upward from there. The two parts are joined into a single solid (their shared circular interface is internal, not a face). Note: the kernel only has a full Sphere primitive — to get a hemisphere you must boolean a sphere with a half-space (e.g. intersect a sphere with a large cube positioned at z ≥ 40).

Checks

params: {
  "type": "valid_solid"
}

details: {
  "root_count": 1,
  "solids_produced": 1
}

params: {
  "type": "bbox",
  "min": [
    -20,
    -20,
    0
  ],
  "max": [
    20,
    20,
    55
  ],
  "tolerance_mm": 0.2
}

details: {
  "actual_max": [
    20,
    20,
    55
  ],
  "actual_min": [
    -20,
    -20,
    0
  ],
  "deviation_max": [
    0,
    0,
    0
  ],
  "deviation_min": [
    0,
    0,
    0
  ],
  "max_abs_deviation_mm": 0,
  "tolerance_mm": 0.2
}

params: {
  "type": "mass_props",
  "volume_mm3": 71068.58,
  "tolerance_pct": 2
}

details: {
  "volume": {
    "actual_mm3": 71049.89827226328,
    "deviation_pct": 0.026286901661356787,
    "pass": true,
    "spec_mm3": 71068.58,
    "tolerance_pct": 2
  }
}

params: {
  "type": "step_roundtrip",
  "tolerance_pct": 2
}

details: {
  "per_solid": [
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          20,
          20,
          55
        ],
        "original_min": [
          -20,
          -20,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          20,
          20,
          55
        ],
        "roundtripped_min": [
          -20,
          -20,
          0
        ],
        "tolerance_mm": 1.57797338380595
      },
      "index": 0,
      "pass": true,
      "volume": {
        "deviation_pct": 0.08373059134184836,
        "original_mm3": 71048.92234099135,
        "pass": true,
        "roundtripped_mm3": 70989.43265817323
      }
    }
  ],
  "tolerance_pct": 2
}

Tool calls

{}

{}

{
  "document_id": "doc_1781202420733_1",
  "type": "cube",
  "name": "CubeRaw",
  "params": {
    "size": [
      40,
      40,
      40
    ]
  }
}

{
  "document_id": "doc_1781202420733_1",
  "type": "translate",
  "name": "Cube",
  "params": {
    "offset": [
      -20,
      -20,
      0
    ],
    "child": 1
  }
}

{
  "document_id": "doc_1781202420733_1",
  "type": "sphere",
  "name": "SphereRaw",
  "params": {
    "radius": 15
  }
}

{
  "document_id": "doc_1781202420733_1",
  "type": "cube",
  "name": "HalfSpaceRaw",
  "params": {
    "size": [
      200,
      200,
      200
    ]
  }
}

{
  "document_id": "doc_1781202420733_1",
  "type": "sphere",
  "name": "SphereRaw",
  "params": {
    "radius": 15,
    "segments": 64
  }
}

{
  "document_id": "doc_1781202420733_1",
  "type": "translate",
  "name": "SphereAtTop",
  "params": {
    "offset": [
      0,
      0,
      40
    ],
    "child": 4
  }
}

{
  "document_id": "doc_1781202420733_1",
  "type": "translate",
  "name": "HalfSpace",
  "params": {
    "offset": [
      -100,
      -100,
      40
    ],
    "child": 3
  }
}

{
  "document_id": "doc_1781202420733_1",
  "type": "intersection",
  "name": "Hemisphere",
  "params": {
    "children": [
      5,
      6
    ]
  }
}

{
  "document_id": "doc_1781202420733_1",
  "type": "intersection",
  "name": "Hemisphere",
  "params": {
    "left": 5,
    "right": 6
  }
}

{
  "document_id": "doc_1781202420733_1",
  "type": "union",
  "name": "CubeWithDome",
  "params": {
    "left": 2,
    "right": 7
  }
}

{
  "document_id": "doc_1781202420733_1"
}

{
  "document_id": "doc_1781202420733_1"
}

{
  "document_id": "doc_1781202420733_1"
}

{
  "document_id": "doc_1781202420733_1",
  "part_id": "1"
}

{
  "document_id": "doc_1781202420733_1",
  "part_id": "2"
}

{
  "document_id": "doc_1781202420733_1",
  "part_id": "3"
}

{
  "document_id": "doc_1781202420733_1",
  "part_id": "4"
}

{
  "document_id": "doc_1781202420733_1",
  "part_id": "5"
}

{
  "document_id": "doc_1781202420733_1",
  "part_id": "6"
}

{
  "document_id": "doc_1781202420733_1",
  "part_id": "7"
}

{
  "document_id": "doc_1781202420733_1"
}

{
  "document_id": "doc_1781202420733_1"
}

{
  "document_id": "doc_1781202420733_1"
}

{
  "document_id": "doc_1781202420733_1"
}

What the model built

isometric render via vcad-render · the model's actual .vcad output, faceted at 28 segments per cylinder · download 20260611T182700Z-a9ab.vcad

.vcad source

{
  "version": "0.1",
  "nodes": {
    "1": {
      "id": 1,
      "name": "CubeRaw",
      "op": {
        "type": "Cube",
        "size": {
          "x": 40,
          "y": 40,
          "z": 40
        }
      }
    },
    "2": {
      "id": 2,
      "name": "Cube",
      "op": {
        "type": "Translate",
        "child": 1,
        "offset": {
          "x": -20,
          "y": -20,
          "z": 0
        }
      }
    },
    "3": {
      "id": 3,
      "name": "HalfSpaceRaw",
      "op": {
        "type": "Cube",
        "size": {
          "x": 200,
          "y": 200,
          "z": 200
        }
      }
    },
    "4": {
      "id": 4,
      "name": "SphereRaw",
      "op": {
        "type": "Sphere",
        "radius": 15,
        "segments": 64
      }
    },
    "5": {
      "id": 5,
      "name": "SphereAtTop",
      "op": {
        "type": "Translate",
        "child": 4,
        "offset": {
          "x": 0,
          "y": 0,
          "z": 40
        }
      }
    },
    "6": {
      "id": 6,
      "name": "HalfSpace",
      "op": {
        "type": "Translate",
        "child": 3,
        "offset": {
          "x": -100,
          "y": -100,
          "z": 40
        }
      }
    },
    "7": {
      "id": 7,
      "name": "Hemisphere",
      "op": {
        "type": "Intersection",
        "left": 5,
        "right": 6
      }
    },
    "8": {
      "id": 8,
      "name": "CubeWithDome",
      "op": {
        "type": "Union",
        "left": 2,
        "right": 7
      }
    }
  },
  "materials": {},
  "part_materials": {},
  "roots": [
    {
      "root": 8,
      "material": "default"
    }
  ]
}

generated 2026-06-19T01:47:55.953Z · static site, regenerate with npm run build -w @mecheval/leaderboard