← mecheval / run / a5-disc-hub-01 / claude-mcp-claude-opus-4-7 / 20260611T223844Z-5dfe

run 20260611T223844Z-5dfe

a5-disc-hub-01 · claude-mcp-claude-opus-4-7

Summary

statusfail
score0.88 (7/8)
submissionself-run
modelclaude-mcp-claude-opus-4-7 (anthropic)
started2026-06-11T22:38:44.639Z
ended2026-06-11T22:40:38.933Z
tokens618,464 in · 6,838 out · 625,302 total
wallclock114.0s
tool calls41
task hash8dd72b3043a88d92…
vcad hashd7bd0114e1e40e44…

Prompt

Make a flanged disc with a raised hub as a single solid. The outer flange is a cylinder of diameter 100mm and height 10mm, base on the XY plane (z = 0 to z = 10), centered on the Z axis. Concentric with the flange and sitting on top of it is a raised hub cylinder of diameter 40mm and height 20mm (z = 10 to z = 30). A central through-bore of diameter 18mm runs along the Z axis through the full combined height (z = 0 to z = 30). Six bolt holes of diameter 8mm, axes parallel to Z, pass through the flange only (z = 0 to z = 10), arranged on a bolt circle of diameter 75mm (radius 37.5mm) centered on the Z axis, evenly spaced every 60 degrees with the first hole on the +X axis: positions (37.5, 0), (18.75, 32.476), (-18.75, 32.476), (-37.5, 0), (-18.75, -32.476), (18.75, -32.476). Output a single solid.

Checks

0
valid_solid
pass
params + details 
params: {
  "type": "valid_solid"
}

details: {
  "root_count": 10,
  "solids_produced": 10
}
1
bbox
pass
params + details 
params: {
  "type": "bbox",
  "min": [
    -50,
    -50,
    0
  ],
  "max": [
    50,
    50,
    30
  ],
  "tolerance_mm": 0.2
}

details: {
  "actual_max": [
    50,
    50,
    30
  ],
  "actual_min": [
    -50,
    -50,
    0
  ],
  "deviation_max": [
    0,
    0,
    0
  ],
  "deviation_min": [
    0,
    0,
    0
  ],
  "max_abs_deviation_mm": 0,
  "tolerance_mm": 0.2
}
2
mass_props
fail
volume off by 364.9%
params + details 
params: {
  "type": "mass_props",
  "volume_mm3": 93022.56,
  "center_of_mass": [
    0,
    0,
    8.23
  ],
  "tolerance_pct": 1.5
}

details: {
  "center_of_mass": {
    "actual": [
      0.043305356417197995,
      2.138315536855365e-16,
      8.59505518818209
    ],
    "bbox_diagonal_mm": 144.5683229480096,
    "deviation": [
      0.043305356417197995,
      2.138315536855365e-16,
      0.36505518818209026
    ],
    "max_abs_deviation_mm": 0.36505518818209026,
    "pass": true,
    "spec": [
      0,
      0,
      8.23
    ],
    "tolerance_mm": 2.168524844220144
  },
  "volume": {
    "actual_mm3": 432479.33985515754,
    "deviation_pct": 364.91876793667853,
    "pass": false,
    "spec_mm3": 93022.56,
    "tolerance_pct": 1.5
  }
}
3
hole_count
pass
params + details 
params: {
  "type": "hole_count",
  "diameter_mm": 18,
  "expected": 1,
  "diameter_tolerance_mm": 0.1
}

details: {
  "actual": 1,
  "diameter_mm": 18,
  "diameter_tolerance_mm": 0.1,
  "expected": 1,
  "found": [
    [
      0,
      0,
      18
    ]
  ]
}
4
hole_positions
pass
params + details 
params: {
  "type": "hole_positions",
  "diameter_mm": 18,
  "positions": [
    [
      0,
      0,
      0
    ]
  ],
  "tolerance_mm": 0.2
}

details: {
  "diameter_mm": 18,
  "per_expected": [
    {
      "distance_mm": 0,
      "matched_hole": [
        0,
        0
      ],
      "pass": true,
      "spec_xy": [
        0,
        0
      ]
    }
  ],
  "tolerance_mm": 0.2,
  "unmatched_extras": []
}
5
hole_count
pass
params + details 
params: {
  "type": "hole_count",
  "diameter_mm": 8,
  "expected": 6,
  "diameter_tolerance_mm": 0.05
}

details: {
  "actual": 6,
  "diameter_mm": 8,
  "diameter_tolerance_mm": 0.05,
  "expected": 6,
  "found": [
    [
      37.5,
      0,
      8
    ],
    [
      18.750000000000004,
      32.47595264191645,
      8
    ],
    [
      -18.749999999999993,
      32.47595264191645,
      8
    ],
    [
      -37.5,
      4.592425496802574e-15,
      8
    ],
    [
      -18.750000000000018,
      -32.475952641916436,
      8
    ],
    [
      18.749999999999975,
      -32.475952641916464,
      8
    ]
  ]
}
6
hole_positions
pass
params + details 
params: {
  "type": "hole_positions",
  "diameter_mm": 8,
  "positions": [
    [
      37.5,
      0,
      0
    ],
    [
      18.75,
      32.476,
      0
    ],
    [
      -18.75,
      32.476,
      0
    ],
    [
      -37.5,
      0,
      0
    ],
    [
      -18.75,
      -32.476,
      0
    ],
    [
      18.75,
      -32.476,
      0
    ]
  ],
  "tolerance_mm": 0.3
}

details: {
  "diameter_mm": 8,
  "per_expected": [
    {
      "distance_mm": 0,
      "matched_hole": [
        37.5,
        0
      ],
      "pass": true,
      "spec_xy": [
        37.5,
        0
      ]
    },
    {
      "distance_mm": 0.000047358083548942886,
      "matched_hole": [
        18.750000000000004,
        32.47595264191645
      ],
      "pass": true,
      "spec_xy": [
        18.75,
        32.476
      ]
    },
    {
      "distance_mm": 0.000047358083548942886,
      "matched_hole": [
        -18.749999999999993,
        32.47595264191645
      ],
      "pass": true,
      "spec_xy": [
        -18.75,
        32.476
      ]
    },
    {
      "distance_mm": 4.592425496802574e-15,
      "matched_hole": [
        -37.5,
        4.592425496802574e-15
      ],
      "pass": true,
      "spec_xy": [
        -37.5,
        0
      ]
    },
    {
      "distance_mm": 0.00004735808356315374,
      "matched_hole": [
        -18.750000000000018,
        -32.475952641916436
      ],
      "pass": true,
      "spec_xy": [
        -18.75,
        -32.476
      ]
    },
    {
      "distance_mm": 0.00004735808353473203,
      "matched_hole": [
        18.749999999999975,
        -32.475952641916464
      ],
      "pass": true,
      "spec_xy": [
        18.75,
        -32.476
      ]
    }
  ],
  "tolerance_mm": 0.3,
  "unmatched_extras": []
}
7
step_roundtrip
pass
params + details 
params: {
  "type": "step_roundtrip",
  "tolerance_pct": 1.5
}

details: {
  "per_solid": [
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          50,
          50,
          10
        ],
        "original_min": [
          -50,
          -50,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          50,
          50,
          10
        ],
        "roundtripped_min": [
          -50,
          -50,
          0
        ],
        "tolerance_mm": 2.126617031813674
      },
      "index": 0,
      "pass": true,
      "volume": {
        "deviation_pct": 0.4815246536494272,
        "original_mm3": 78413.71233533505,
        "pass": true,
        "roundtripped_mm3": 78036.13097859867
      }
    },
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          20,
          20,
          20
        ],
        "original_min": [
          -20,
          -20,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          20,
          20,
          20
        ],
        "roundtripped_min": [
          -20,
          -20,
          0
        ],
        "tolerance_mm": 0.8999999999999999
      },
      "index": 1,
      "pass": true,
      "volume": {
        "deviation_pct": 0.48152755025717725,
        "original_mm3": 25092.388011673305,
        "pass": true,
        "roundtripped_mm3": 24971.56125037967
      }
    },
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          20,
          20,
          30
        ],
        "original_min": [
          -20,
          -20,
          10
        ],
        "pass": true,
        "roundtripped_max": [
          20,
          20,
          30
        ],
        "roundtripped_min": [
          -20,
          -20,
          10
        ],
        "tolerance_mm": 0.8999999999999999
      },
      "index": 2,
      "pass": true,
      "volume": {
        "deviation_pct": 0.4815275502573069,
        "original_mm3": 25092.388011673345,
        "pass": true,
        "roundtripped_mm3": 24971.561250379676
      }
    },
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          50,
          50,
          30
        ],
        "original_min": [
          -50,
          -50,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          50,
          50,
          30
        ],
        "roundtripped_min": [
          -50,
          -50,
          0
        ],
        "tolerance_mm": 2.168524844220144
      },
      "index": 3,
      "pass": true,
      "volume": {
        "deviation_pct": 0.5009810144913712,
        "original_mm3": 103506.10034700813,
        "pass": true,
        "roundtripped_mm3": 102987.55443542924
      }
    },
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          9,
          9,
          30
        ],
        "original_min": [
          -9,
          -9,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          9,
          9,
          30
        ],
        "roundtripped_min": [
          -9,
          -9,
          0
        ],
        "tolerance_mm": 0.59016946718718
      },
      "index": 4,
      "pass": true,
      "volume": {
        "deviation_pct": 0.4815263208403275,
        "original_mm3": 7621.812623092571,
        "pass": true,
        "roundtripped_mm3": 7585.11158918725
      }
    },
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          4,
          4,
          10
        ],
        "original_min": [
          -4,
          -4,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          4,
          4,
          10
        ],
        "roundtripped_min": [
          -4,
          -4,
          0
        ],
        "tolerance_mm": 0.2264950330581225
      },
      "index": 5,
      "pass": true,
      "volume": {
        "deviation_pct": 0,
        "original_mm3": 499.4312060266986,
        "pass": true,
        "roundtripped_mm3": 499.4312060266986
      }
    },
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          41.5,
          4,
          10
        ],
        "original_min": [
          33.5,
          -4,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          41.5,
          4,
          10
        ],
        "roundtripped_min": [
          33.5,
          -4,
          0
        ],
        "tolerance_mm": 0.2264950330581225
      },
      "index": 6,
      "pass": true,
      "volume": {
        "deviation_pct": 0,
        "original_mm3": 499.43125214672364,
        "pass": true,
        "roundtripped_mm3": 499.43125214672364
      }
    },
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          41.5,
          36.46738815307617,
          10
        ],
        "original_min": [
          -41.5,
          -36.46738815307617,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          41.5,
          36.46738815307617,
          10
        ],
        "roundtripped_min": [
          -41.5,
          -36.46738815307617,
          0
        ],
        "tolerance_mm": 1.6641539468560018
      },
      "index": 7,
      "pass": true,
      "volume": {
        "deviation_pct": 0,
        "original_mm3": 2996.5872068097256,
        "pass": true,
        "roundtripped_mm3": 2996.5872068097256
      }
    },
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          50,
          50,
          30
        ],
        "original_min": [
          -50,
          -50,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          50,
          50,
          30
        ],
        "roundtripped_min": [
          -50,
          -50,
          0
        ],
        "tolerance_mm": 2.168524844220144
      },
      "index": 8,
      "pass": true,
      "volume": {
        "deviation_pct": 0.5152862553082785,
        "original_mm3": 95884.28772391546,
        "pass": true,
        "roundtripped_mm3": 95390.20916827388
      }
    },
    {
      "bbox": {
        "max_abs_deviation_mm": 0,
        "original_max": [
          50,
          50,
          30
        ],
        "original_min": [
          -50,
          -50,
          0
        ],
        "pass": true,
        "roundtripped_max": [
          50,
          50,
          30
        ],
        "roundtripped_min": [
          -50,
          -50,
          0
        ],
        "tolerance_mm": 2.168524844220144
      },
      "index": 9,
      "pass": true,
      "volume": {
        "deviation_pct": 0.5215845869664204,
        "original_mm3": 92873.20113747656,
        "pass": true,
        "roundtripped_mm3": 92388.78883492116
      }
    }
  ],
  "tolerance_pct": 1.5
}

Tool calls

0
open_document
ok
1ms
args
{}
1
create_cad_loon
err
8ms
args
{
  "source": "[let\n  [let\n    [union\n      [translate 0 0 10 [cylinder 20 20]]\n      [cylinder 50 10]]\n    body]\n  [let\n    [circular-pattern 0 0 0 0 0 1 6 360\n      [translate 37.5 0 0 [cylinder 4 10]]]\n    bolt-holes]\n  [difference [cylinder 9 30]\n    [difference bolt-holes body]]]"
}
2
create
err
8ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "Flange",
  "params": {
    "radius": 50,
    "height": 10
  }
}
3
create
err
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "Hub",
  "params": {
    "radius": 20,
    "height": 20,
    "z": 10
  }
}
4
create_cad_loon
err
5ms
args
{
  "source": "[difference\n  [union\n    [translate 37.5 0 0 [cylinder 4 10]]\n    [union\n      [rotate 0 0 60 [translate 37.5 0 0 [cylinder 4 10]]]\n      [union\n        [rotate 0 0 120 [translate 37.5 0 0 [cylinder 4 10]]]\n        [union\n          [rotate 0 0 180 [translate 37.5 0 0 [cylinder 4 10]]]\n          [union\n            [rotate 0 0 240 [translate 37.5 0 0 [cylinder 4 10]]]\n            [union\n              [rotate 0 0 300 [translate 37.5 0 0 [cylinder 4 10]]]\n              [union\n                [cylinder 9 30]\n                [difference\n                  [cylinder 9 30]\n                  [union\n                    [cylinder 50 10]\n                    [translate 0 0 10 [cylinder 20 20]]]]]]]]]]]]"
}
5
create_cad_loon
ok
10ms
args
{
  "source": "[pipe\n  [union [cylinder 50 10] [translate 0 0 10 [cylinder 20 20]]]\n  [difference [cylinder 9 30]]\n  [difference [translate 37.5 0 0 [cylinder 4 10]]]\n  [difference [rotate 0 0 60 [translate 37.5 0 0 [cylinder 4 10]]]]\n  [difference [rotate 0 0 120 [translate 37.5 0 0 [cylinder 4 10]]]]\n  [difference [rotate 0 0 180 [translate 37.5 0 0 [cylinder 4 10]]]]\n  [difference [rotate 0 0 240 [translate 37.5 0 0 [cylinder 4 10]]]]\n  [difference [rotate 0 0 300 [translate 37.5 0 0 [cylinder 4 10]]]]]"
}
6
read
ok
5ms
args
{
  "document_id": "doc_1781217524809_1"
}
7
create
ok
4ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "Flange",
  "params": {
    "radius": 50,
    "height": 10,
    "segments": 64
  }
}
8
create
ok
5ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "Hub",
  "params": {
    "radius": 20,
    "height": 20,
    "segments": 64
  }
}
9
create
ok
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "Bore",
  "params": {
    "radius": 9,
    "height": 30,
    "segments": 64
  }
}
10
create
ok
1ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "BoltHole",
  "params": {
    "radius": 4,
    "height": 10,
    "segments": 32
  }
}
11
delete
ok
6ms
args
{
  "document_id": "doc_1781217524809_1",
  "part_id": "1"
}
12
delete
ok
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "part_id": "2"
}
13
delete
ok
1ms
args
{
  "document_id": "doc_1781217524809_1",
  "part_id": "3"
}
14
delete
ok
1ms
args
{
  "document_id": "doc_1781217524809_1",
  "part_id": "4"
}
15
create
ok
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "Flange",
  "params": {
    "radius": 50,
    "height": 10,
    "segments": 64
  }
}
16
create
err
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "union",
  "name": "AddHub",
  "parent_part_id": "1",
  "params": {
    "shape": {
      "type": "translate",
      "x": 0,
      "y": 0,
      "z": 10,
      "shape": {
        "type": "cylinder",
        "radius": 20,
        "height": 20,
        "segments": 64
      }
    }
  }
}
17
get_document
ok
2ms
args
{
  "document_id": "doc_1781217524809_1"
}
18
update
ok
6ms
args
{
  "document_id": "doc_1781217524809_1",
  "node_id": "1",
  "params": {
    "op": {
      "type": "Difference",
      "left": {
        "type": "Union",
        "left": {
          "type": "Cylinder",
          "radius": 50,
          "height": 10,
          "segments": 64
        },
        "right": {
          "type": "Translate",
          "x": 0,
          "y": 0,
          "z": 10,
          "shape": {
            "type": "Cylinder",
            "radius": 20,
            "height": 20,
            "segments": 64
          }
        }
      },
      "right": {
        "type": "Cylinder",
        "radius": 9,
        "height": 30,
        "segments": 64
      }
    }
  }
}
19
get_document
ok
2ms
args
{
  "document_id": "doc_1781217524809_1"
}
20
delete
ok
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "part_id": "1"
}
21
create
ok
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "Flange",
  "params": {
    "radius": 50,
    "height": 10,
    "segments": 64
  }
}
22
create
ok
4ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "HubCyl",
  "parent_part_id": "1",
  "params": {
    "radius": 20,
    "height": 20,
    "segments": 64
  }
}
23
get_document
ok
2ms
args
{
  "document_id": "doc_1781217524809_1"
}
24
delete
ok
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "part_id": "1"
}
25
delete
ok
1ms
args
{
  "document_id": "doc_1781217524809_1",
  "part_id": "2"
}
26
create_cad_loon
ok
3ms
args
{
  "source": "[pipe\n  [union [cylinder 50 10] [translate 0 0 10 [cylinder 20 20]]]\n  [difference [cylinder 9 30]]\n  [difference [circular-pattern 0 0 0 0 0 1 6 360 [translate 37.5 0 0 [cylinder 4 10]]]]]",
  "format": "json"
}
27
create
ok
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "Flange",
  "params": {
    "radius": 50,
    "height": 10,
    "segments": 64
  }
}
28
create
err
3ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "translate",
  "name": "HubLifted",
  "parent_part_id": "1",
  "params": {
    "x": 0,
    "y": 0,
    "z": 10
  }
}
29
create
ok
3ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "Hub",
  "params": {
    "radius": 20,
    "height": 20,
    "segments": 64
  }
}
30
create
err
3ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "translate",
  "name": "HubLifted",
  "params": {
    "child": 2,
    "x": 0,
    "y": 0,
    "z": 10
  }
}
31
create
ok
3ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "translate",
  "name": "HubLifted",
  "params": {
    "child": 2,
    "offset": {
      "x": 0,
      "y": 0,
      "z": 10
    }
  }
}
32
create
ok
4ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "union",
  "name": "FlangeHub",
  "params": {
    "left": 1,
    "right": 3
  }
}
33
create
ok
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "Bore",
  "params": {
    "radius": 9,
    "height": 30,
    "segments": 64
  }
}
34
create
ok
1ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "cylinder",
  "name": "BoltHole",
  "params": {
    "radius": 4,
    "height": 10,
    "segments": 32
  }
}
35
create
ok
3ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "translate",
  "name": "BoltHoleAtR",
  "params": {
    "child": 6,
    "offset": {
      "x": 37.5,
      "y": 0,
      "z": 0
    }
  }
}
36
create
ok
3ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "circular_pattern",
  "name": "BoltHoles",
  "params": {
    "child": 7,
    "axis_origin": {
      "x": 0,
      "y": 0,
      "z": 0
    },
    "axis_dir": {
      "x": 0,
      "y": 0,
      "z": 1
    },
    "count": 6,
    "angle_deg": 360
  }
}
37
create
ok
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "difference",
  "name": "MinusBore",
  "params": {
    "left": 4,
    "right": 5
  }
}
38
create
ok
2ms
args
{
  "document_id": "doc_1781217524809_1",
  "type": "difference",
  "name": "FlangedDisc",
  "params": {
    "left": 9,
    "right": 8
  }
}
39
get_document
ok
2ms
args
{
  "document_id": "doc_1781217524809_1"
}
40
get_document
ok
1ms
args
{
  "document_id": "doc_1781217524809_1"
}

What the model built

isometric render via vcad-render · the model's actual .vcad output, faceted at 28 segments per cylinder · download 20260611T223844Z-5dfe.vcad

.vcad source

{
  "version": "0.1",
  "nodes": {
    "1": {
      "id": 1,
      "name": "Flange",
      "op": {
        "type": "Cylinder",
        "radius": 50,
        "height": 10,
        "segments": 64
      }
    },
    "2": {
      "id": 2,
      "name": "Hub",
      "op": {
        "type": "Cylinder",
        "radius": 20,
        "height": 20,
        "segments": 64
      }
    },
    "3": {
      "id": 3,
      "name": "HubLifted",
      "op": {
        "type": "Translate",
        "child": 2,
        "offset": {
          "x": 0,
          "y": 0,
          "z": 10
        }
      }
    },
    "4": {
      "id": 4,
      "name": "FlangeHub",
      "op": {
        "type": "Union",
        "left": 1,
        "right": 3
      }
    },
    "5": {
      "id": 5,
      "name": "Bore",
      "op": {
        "type": "Cylinder",
        "radius": 9,
        "height": 30,
        "segments": 64
      }
    },
    "6": {
      "id": 6,
      "name": "BoltHole",
      "op": {
        "type": "Cylinder",
        "radius": 4,
        "height": 10,
        "segments": 32
      }
    },
    "7": {
      "id": 7,
      "name": "BoltHoleAtR",
      "op": {
        "type": "Translate",
        "child": 6,
        "offset": {
          "x": 37.5,
          "y": 0,
          "z": 0
        }
      }
    },
    "8": {
      "id": 8,
      "name": "BoltHoles",
      "op": {
        "type": "CircularPattern",
        "child": 7,
        "axis_origin": {
          "x": 0,
          "y": 0,
          "z": 0
        },
        "axis_dir": {
          "x": 0,
          "y": 0,
          "z": 1
        },
        "count": 6,
        "angle_deg": 360
      }
    },
    "9": {
      "id": 9,
      "name": "MinusBore",
      "op": {
        "type": "Difference",
        "left": 4,
        "right": 5
      }
    },
    "10": {
      "id": 10,
      "name": "FlangedDisc",
      "op": {
        "type": "Difference",
        "left": 9,
        "right": 8
      }
    }
  },
  "materials": {},
  "part_materials": {},
  "roots": [
    {
      "root": 1,
      "material": "default"
    },
    {
      "root": 2,
      "material": "default"
    },
    {
      "root": 3,
      "material": "default"
    },
    {
      "root": 4,
      "material": "default"
    },
    {
      "root": 5,
      "material": "default"
    },
    {
      "root": 6,
      "material": "default"
    },
    {
      "root": 7,
      "material": "default"
    },
    {
      "root": 8,
      "material": "default"
    },
    {
      "root": 9,
      "material": "default"
    },
    {
      "root": 10,
      "material": "default"
    }
  ]
}
mecheval · an evaluation suite by Municipal Robotics
sibling project: vcad. · github

generated 2026-06-19T01:47:56.200Z · static site, regenerate with npm run build -w @mecheval/leaderboard